i have a 3/4 hp 2 wire jet pump now with a 20gal bladder tank if i switch to a 1.5 hp 3 wire do i run 2 wire to control box from elec source or 3 wire
c.young
i have a 3/4 hp 2 wire jet pump now with a 20gal bladder tank if i switch to a 1.5 hp 3 wire do i run 2 wire to control box from elec source or 3 wire
c.young
c.young
All jet pumps have two wires. Two hot's and usually a ground. Submersibles are labeled either two or three wire which is rather confusing since a two wire has three wires and a three wire has four counting the ground wires on both.
So are you switching to a three wire submersible pump from the jet pump or are you just installing another jet pump?
Products and Pricing
Wealth building made easy, watch the video
switching to a submersible 3 wire,,i have a 6"casing 50' deep well, 35' to water dont know how much it produces and want to run house and sprinklers,,jet pump is to small
c.young
Your right, a jet pump just don't do a good job. If your well will produce enough water a sub will get a lot more than the jet.
How many gallons per minute do you need?
If your pump motor has a black red and yellow plus a green ground wire, you need a control box to match the motor. You can't just hook it to 230 volts.
Products and Pricing
Wealth building made easy, watch the video
There are currently 1 users browsing this thread. (0 members and 1 guests)